Alloy 803 Pipe & fittings

TUBERÍA DE ALEACIÓN 803

Incoloy® Alloy 803 (UNS S35045) Is An Iron-Nickel-Chromium Alloy

The nickel and chromium contents are higher than those of Alloy 800H and 800HT. A cost-effective material that provides an exceptional level of high-temperature corrosion resistance in oxidation, sulfidation, and carburization environments.

Alloy 803 exhibits excellent stress-rupture strengths at elevated temperatures. These characteristics, along with high resistance to carburization and cyclic oxidation, make Alloy 803 the material of choice.

Alloy 803 is designed for use in petrochemical, chemical and thermal processing applications including ID-finned pyrolysis tubing in high-severity ethylene furnaces.A

Share this product with a co-worker or friend!

High Nickel Alloy and Specialty Stainless Piping Material Service Center

Alloy 200/201 Pipe & Fittings

Nickel 200 (UNS  NO2200) is commercially pure (99.6%) wrought nickel. It has excellent mechanical properties and is highly resistant in myriad corrosive environments. Both Nickel 200 and 201 are approved for construction of pressure vessels and components under ASME Boiler and Pressure Vessel Code Section VIII, Division 1. Nickel 200 can be used to reduce the development of passive oxide films in highly oxidative media.

High Nickel Alloy and Specialty Stainless Piping Material Service Center

Alloy 400 Pipe & Fittings

Monel® Alloy 400 (UNS N04400) is a solid solution Alloy that may be hardened only by cold working. It has high strength and toughness over a wide temperature range and excellent resistance to many corrosive environments. Alloy 400 is virtually immune to chloride-ion stress corrosion cracking in typical environments.

High Nickel Alloy and Specialty Stainless Piping Material Service Center

Alloy 825 Pipe & fittings

Incoloy® Alloy 825 (UNS N08825) is a nickel-iron-chromium alloy with additions of molybdenum, copper, and titanium. The alloy’s chemical composition is designed to provide exceptional resistance to many corrosive environments. The nickel content of Alloy 825 is sufficient for resistance to chloride-ion stress corrosion cracking.

Incoloy Alloy 020 Nickel-Iron-Chromium Pipe

Ways To Use Alloy 20 Nickel Piping

Incoloy® Alloy 20 (UNS N08020) is an austenitic nickel-iron-chromium Alloy with additions of copper and molybdenum. The nickel content makes Alloy 20 resistant to chloride-ion stress-corrosion cracking. Copper and molybdenum give resistance to reducing environments. The molybdenum content also provides good resistance to pitting and crevice corrosion.

Get Started

About

Downloads