Quality Assurance

Alloy 347H Pipe & Fittings

All our Quality Assurance efforts are supported each and every day through a qualitative specification assurance process which is second to none. We maintain complete material traceability not only to the manufacturer but to the origin of the raw material as well. All material composition and property data is maintained in our in-house data storage and retrieval system.

PAI specification confirmation is performed by in-house certified technicians utilizing the following equipment

  • X-Met 7500 Nuclear Analyzer
  • Confirmation of alloy elements
  • Z-200+ LIBS Analyzer
  • Carbon content verification
  • Arc-Met 8000
  • Optical Emission Spectrometer Carbon content verification
  • Ardox Penetrant Testing (LDP)
  • Surface Abnormalities
  • Panametrics NDT (MG2-DL)
  • Ultrasonic wall thickness testing
  • Fisher Ferrite Scope
  • Ferrite content confirmation
  • RF System Bore Scope
  • Abnormalities inside wall (pass/fail)
PAI specification confirmation is performed by in house certified technicians utilizing the following equipment:

Share this product with a co-worker or friend!

Alloy 600 Pipe

Alloy 200/201 Pipe & Fittings

Nickel 200 (UNS  NO2200) is commercially pure (99.6%) wrought nickel. It has excellent mechanical properties and is highly resistant in myriad corrosive environments. Both Nickel 200 and 201 are approved for construction of pressure vessels and components under ASME Boiler and Pressure Vessel Code Section VIII, Division 1. Nickel 200 can be used to reduce the development of passive oxide films in highly oxidative media.

Incoloy Alloy 020 Nickel-Iron-Chromium Pipe

Alloy 400 Pipe & Fittings

Monel® Alloy 400 (UNS N04400) is a solid solution Alloy that may be hardened only by cold working. It has high strength and toughness over a wide temperature range and excellent resistance to many corrosive environments. Alloy 400 is virtually immune to chloride-ion stress corrosion cracking in typical environments.

High Nickel Alloy and Specialty Stainless Piping Material Service Center

Alloy 825 Pipe & fittings

Incoloy® Alloy 825 (UNS N08825) is a nickel-iron-chromium alloy with additions of molybdenum, copper, and titanium. The alloy’s chemical composition is designed to provide exceptional resistance to many corrosive environments. The nickel content of Alloy 825 is sufficient for resistance to chloride-ion stress corrosion cracking.

Incoloy Alloy 020 Nickel-Iron-Chromium Pipe

Ways To Use Alloy 20 Nickel Piping

Incoloy® Alloy 20 (UNS N08020) is an austenitic nickel-iron-chromium Alloy with additions of copper and molybdenum. The nickel content makes Alloy 20 resistant to chloride-ion stress-corrosion cracking. Copper and molybdenum give resistance to reducing environments. The molybdenum content also provides good resistance to pitting and crevice corrosion.

PA Inc.
6626 Gulf Fwy.
Houston, TX 77087

Get Started

About

Downloads